Original clear vinyl tubing virtually disappears in any water feature. Available in three- ($12) and five-foot ($20) lengths.

Original clear vinyl tubing virtually disappears in any water feature. Available in three- ($7) and five-foot ($11) lengths.

Original clear vinyl tubing virtually disappears in any water feature. Available in three- ($10) and five-foot ($17) lengths.

Original clear vinyl tubing virtually disappears in any water feature. Available in three- ($20) and five-foot ($33) lengths.

With an inside dimension of one inch, this no-kink tubing is available in three- ($13) and five-foot ($21) lengths.

With an inside dimension of 3/8 inch, this no-kink tubing is available in three- ($4) and five-foot ($7) lengths.

With an inside dimension of 1/2 inch, this no-kink tubing is available in three- ($7) and five-foot ($11) lengths.

With an inside dimension of 3/4 inch, this no-kink tubing is available in three- ($9) and five-foot ($15) lengths.

1 x 3-inch fountain diffuser.

1 x 6-inch fountain diffuser.

The 1 x 10-inch diffuser is used in the 5703F2 Chateau Fountain.

This 3/8-inch plastic connector is used to multiply the channels of water flow from the pump to one or more fountain statues, waterfalls, spray rings or pond features.

This 3/4-inch plastic connector is used to multiply the channels of water flow from the pump to one or more fountain statues, waterfalls, spray rings or pond features.

This 1/2-inch plastic connector is used to multiply the channels of water flow from the pump to one or more fountain statues, waterfalls, spray rings or pond features.

Henri Studio heavy-duty vinyl ½-inch ID Drain Plug. Please measure the inside diameter of the drain hole prior to ordering!

Henri Studio heavy-duty vinyl 1-inch ID Drain Plug. Please measure the inside diameter of the drain hole prior to ordering!

The 13-345 serves as a replacement for a damaged or worn out air stone used in both Vesuvio fountains (set of 3).

This barb adapter has a special cut to permit the pass-through of a light cord, while also permitting the regular flow of water.

This stopper provides a seal for a fountain while guiding two pump cords and one light cord through the bottom of the fountain.

This stopper provides a seal for a fiberglass pool with a 1 7/16-inch ID standpipe. Up to three pump lines can be run and includes two corks (product No. 19-008).

This stopper provides a seal for a fiberglass pool with a 1 7/8-inch ID standpipe. Up to three pump lines can be run and includes two corks (product No. 19-008).

This stopper provides a seal for a fountain while guiding pump and light cables (plume lights AB880, AB870, AB870L) through the bottom of the fountain.

This stopper provides a seal for a fountain while guiding a pump cable through the bottom of the fountain.

This stopper provides a seal in between the tiers of a fountain for ¾-inch NKT (no-kink tubing).

This stopper provides a seal in between the tiers of a fountain for ½-inch NKT (no-kink tubing).

This stopper provides a seal for a single light cord.

This stopper provides a seal for a fountain while guiding pump and light cables (AB871L, AB873L and AB874L) through the bottom of the fountain.

This stopper provides a seal for a Vesuvio fountain pool while guiding pump, light and air-line cables through the bottom of the pool.

This stopper provides a seal for a Vesuvio vase/top while guiding the light and air-line cables through the bottom of the vase.